Formation of liquid cone jet dependent on rise time of driving voltage

This paper reports on transient dynamics of electrospray driven by high step voltage and its dependence on voltage rise time. Three rise times (50 ns, 1.8 μs, and 400 μs) were used to compare influence on liquid dynamics. It was found that, when the applied voltage exceeds a certain level, minute differences in voltage rise time significantly affect jet formation time. A rise time of 50 ns accelerates the jet ejection by about 20% compared with other rise times. These results indicate that optimization of rise time may enable drastic improvement of controllability of drop-on-demand electrospray.     

Characterization of Laves phase in Crofer 22 H stainless steel

This study investigated the effect of annealing temperature on the precipitation behavior of Crofer^® 22 H at 600 °C, 700 °C, and 800 °C. The grain size distribution, precipitate phase identification, and microstructure were analyzed using electron backscatter diffraction (EBSD) and energy dispersive X-ray spectroscopy (EDS). The morphology of Laves phase (Fe,Cr,Si)₂(Nb,W) precipitates having the Cr₂Nb structure changed from strip-like to needle-shaped as the annealing temperature was increased. The precipitates of the Laves phase also shifted from the grain boundaries to the grain interiors when the temperature was increased. However, the average grain size (150 μm) of the ferritic matrix did not significantly change at 600 °C, 700 °C, and 800 °C for 10 h.     

Zeolites are no longer a challenge: Atomic resolution data by Aberration-corrected STEM

Transmission electron microscopy is undoubtedly an indispensable tool for materials characterization, which can currently reach sub-angstrom resolution down to the elemental building blocks of matter, isolated single atoms of most elements. In addition to the phenomenal image resolution, if the material is strong enough, it can be accompanied with chemical information, converting electron microscopy into a unique method for the analysis of a great variety of materials. Unfortunately, extracting all this valuable information is not simple as most materials in one way or another are affected by the strong and localized electron beam. Radiolysis is one kind of reaction between electrons and matter than can cause irreversible structural transformations in our materials. This effect is the predominant factor in zeolites, zeotypes and the majority of molecular sieves. In the present work some results, taken at high voltage (300 kV) and minimizing the exposure to the beam, are presented proving the feasibility of the technique to obtain unprecedented atomic resolution information of different zeolites and microporous solids.     

A comparison of the surface nanostructure from two different types of gram-negative cells: Escherichia coli and Rhodobacter sphaeroides

Bacteria have been studied using different microscopy methods for many years. Recently, the developments of high-speed atomic force microscopy have opened the doors to study bacteria in new ways due to the fact that it uses much less force on the sample while imaging. This makes the high-speed atomic force microscope an indispensable technique for imaging the surface of living bacterial cells because it allows for the high-resolution visualization of surface proteins in their natural condition without disrupting the cell or the activity of the proteins. Previous work examining living cells of Magnetospirillum magneticum AMB-1 demonstrated that the surface of these bacteria was covered with a net-like structure that is mainly composed of porin molecules. However, it was unclear whether or not this feature was unique to other living bacteria. In this study we used the high-speed atomic force microscope to examine the surface of living cells of Escherichia coli and Rhodobacter sphaeroides to compare their structure with that of M. magneticum. Our research clearly demonstrated that both of these types of cells have an outer surface that is covered in a network of nanometer-sized holes similar to M. magneticum. The diameter of the holes was 8.0 ± 1.5 nm for E. coli and 6.6 ± 1.1 nm for R. sphaeroides. The results in this paper confirm that this type of outer surface structure exists in other types of bacteria and it is not unique to Magnetospirillum.     

A study of threshold switching of NbO2 using atom probe tomography and transmission electron microscopy

Threshold switching is a phenomenon where the resistivity of an insulating material changes and the insulator exhibits metallic behavior. This could be explained by phase transformation in oxide materials; however, this behavior is also seen in amorphous insulators. In this study, through an ex-situ experiment using transmission electron microscopy (TEM), we proved that threshold switching of amorphous NbO₂ accompanies local crystallization. The change in I–V characteristics after electroforming was examined by evaluating the concentration profile. Atom probe tomography (APT) combined with in-situ TEM probing technique was performed to understand the threshold switching in amorphous NbO₂. The local crystallization in amorphous NbO₂ was validated by the observed difference in time-of-flight (ToF) between amorphous and crystalline NbO₂. We concluded that the slower ToF of amorphous NbO₂ (a-NbO₂) compared with crystalline NbO₂ (c-NbO₂) is due to the resistivity difference and trap-assisted recombination.     

High-resolution transmission electron microscopy study on reversion of Al2CuMg precipitates in Al–Cu–Mg alloys under irradiation

Image deconvolution analyses showed that reversion of S-Al₂CuMg precipitates occurred in an Al–Cu–Mg alloy during high-resolution transmission electron microscopy observations. A fraction of Mg and Cu atoms in the precipitates diffused into Al matrix due to electron beam irradiation at 300 kV, resulting in structural/chemical reversion of the precipitates. The structural reversion of the S-Al₂CuMg precipitates is closely related with irradiation-induced displacement of atoms. The strong attraction between Cu and Mg atoms might assist the sub-threshold displacement of Cu atoms. One transitional structure is determined to be S′′-Al₁₀Cu₃Mg₃, a precursor of S-Al₂CuMg. Two other transitional structures, Al₃CuMg and Al₁₈Cu₅Mg₅ which have the same lattice parameters of a = c = 0.405 nm as that of S′′-Al₁₀Cu₃Mg₃, but different b values, are suggested.     

Investigation of the performance of bipolar transverse plate ESP in the sintering flue control

In order to improve the particle collection efficiency of the electrostatic precipitator (ESP), a transverse plate ESP with bipolar discharge electrodes is proposed. The simulations of the velocity distribution have shown that when the inlet velocity is 1 m/s, within the range of 40 mm from electrode plate, the average velocities of windward side and leeward side are less than 0.7 m/s and 0.3 m/s respectively. It is clear that the velocity near the collection electrode plate of this bipolar ESP is much lower than that of the ordinary ESP at the same inlet velocity. This low velocity can lead to higher efficiency for fine dust collection due to the less dust re-entrainment in ESP. It is also found that the average velocities are getting lower when the distance between plates electrodes are greater than 150 mm in accordance with the simulations. The voltage current characteristics of the bipolar ESP are superior to the ordinary ESP. The pressure drop of the bipolar ESP is about 30% higher than that of the ordinary one. The dust penetration of the bipolar ESP is about 54% less than that of the ordinary ESP when the sintering dust with 25.405 μm mass median diameter is used as the test particulate under the condition of the electric field from 2.1 kV/cm to 3.2 kV/cm and the velocity from 1.0 m/s to 1.5 m/s.     

The investigation of neutralization process of gas-phase sewage sludge using thermal plasma method

The purpose of this research is to investigate the influence of plasma flow on the composition of gaseous phase organic waste. The experimental method and simulation program “Chemical Workbench” were used for this research. The gas phase waste was neutralized using air plasma in the temperature range of 1200–1700 K. The reactor simulation results showed that the amount of atomic oxygen and nitrogen decreases by 0.5%, meanwhile the amount of carbon monoxide increases by 0.5 percent, as the plasma forming gas is air. The investigation of percentage concentration results showed that as the temperature reaches 1700 K, the H₂ decreases by 4%, CO increases by 7%, CH₄ decreases by 0.4%, CO increases by 0.5%, N₂ decreases by 5%. The experimental measurement results of percentage concentration correlates sufficiently with simulation results for listed gas.     

Precision measurements with LPCTrap at GANIL

The experimental achievements and the results obtained so far with the LPCTrap device installed at GANIL are presented. The apparatus is dedicated to the study of the weak interaction at low energy by means of precise measurements of the β ? ν angular correlation parameter in nuclear β decays. So far, the data collected with three isotopes have enabled to determine, for the first time, the charge state distributions of the recoiling ions, induced by shakeoff process. The analysis is presently refined to deduce the correlation parameters, with the potential of improving both the constraint deduced at low energy on exotic tensor currents (⁶He¹⁺) and the precision on the V _{u d} element of the quark-mixing matrix (³⁵Ar¹⁺ and ¹⁹Ne¹⁺) deduced from the mirror transitions dataset.